E Z Squeeze® High Fluid Loss, High Solids, Lost Circulation Squeeze Material
Description:
	E Z Squeeze is a high fluid loss, high solids slurry, and its performance is unique to other types of LCM. When placed in and/ or across a loss zone, the liquid phase is squeezed from the slurry, leaving a solid plug behind. E Z Squeeze differs from other types of lost circulation materials, in that is rapidly forms a solid plug within the loss zone, rather than remaining at or near the face of the wellbore. This minimizes the possibility of the seal being removed during drilling operations, thereby necessitating repeated remedial treatments of the same zone. Solving the loss problem as soon as possible after it occurs prevents excessive mud volume from entering the formation, further propagating the fractures and compounding the loss problem.
Typical Physical Properties:
	Bulk Density (lb/cu. Ft): 41-46 pH: 12.4 Form: Powder Appearance: Off white to gray Odor: Slight Solubility in Water: Partial
Advantages:
	•Solves lost circulation problems. •Eliminates risk of side-tracking hole, (as can occur with cement) •Does not contaminate drilling fluid •Less costly than mixing and pumping pill after pill of conventional lost circulation material •If necessary, E Z Squeeze can be cleaned up through high alkaline treatment. •Compatible with all water-base, oil-base, and synthetic-base muds
Recommended Treatment:
	•Open hole remedial lost circulation squeeze. •Open hole preventative lost circulation squeeze. •Cased hole squeeze for sealing perforations or casing leaks. •No special equipment is needed to pump E Z Squeeze. The slurry can be mixed in a clean, uncontaminated mud pit and pumped with rig pumps.
Packaging:
	E Z Squeeze is available in 25 pound multi-wall bags, 50 bags/ pallet.